Thursday, March 06, 2008

Cisco 7970 SIP on Asterisk and Trixbox

If you have ever worked with a Cisco 7970 Phone, you will notice they are very flaky sometimes and are in a real need for a hard reset. Normally the factory reset of holding # and pressing 123456789*0# works but if that doesn't you'll either have to setup a TFTP server and load some default firmware or press 3 4 6 1 6 7 2 8 5 0 * #

A good page discussing this issue for people playing around with different firmware - Thank goodness for this page, otherwise I would have an $800.00 doorstop.

http://www.voipuser.org/forum_topic_10868.html

No comments: